SABIC HDPE B5823 is a blow molding grade tuned for consumer packaging up to 5 litres. High density delivers the wall stiffness that keeps shelves-ready bottles square, while the copolymer backbone holds enough environmental stress crack resistance for detergents and household chemicals.
It processes on standard small parison lines with short cycle times, and the resulting bottles handle filling, capping and transport without panel distortion.
SABIC HDPE 25 kg bag
Values are typical and should be verified against the mill test report for the specific lot.
| Property | Value | Test method |
|---|---|---|
| Density | 958 kg/m³ | ISO 1183 |
| MFR (21.6 kg) | 23 g/10min | ISO 1133 |
| Food contact suitability | Available, verify regulation per market | Regulatory check |
| Processing | Small parison blow molding | Typical practice |
| Bottle stiffness | High | Typical outcome |
| ESCR | Balanced | Typical outcome |
B5823 is differentiated by the balance it strikes in the 1-5 L segment: stiff enough for thin walls and fast cycles, yet with ESCR that survives detergent concentrates and household chemicals that crack brittle grades.
Bottle designers use the grade to trim wall thickness on shampoo, cleaner and food bottles, then rely on paneling design rather than heavier walls to survive vacuum and stacking loads.
Thin walls with detergent-grade ESCR
Pre-dry only if surface moisture is visible.
Extrusion melt temperature 190-220 °C on small parison heads.
Short parison, quick close and blow for high output.
Aggressive mold cooling locks stiffness and shortens cycle.
Household chemical packaging up to 5 L.
Juice, milk and edible oil bottles.
Stiff, printable personal care packs.
Standard valve bag for palletised shipment.
FIBC for reduced handling and waste.
Bulk delivery for continuous lines.
Cycle and cooling settings for stiff consumer bottles.
Read moreBalancing drop resistance and rigidity for small bottles.
Read moreWhat buyers check before qualifying a bottle grade.
Read moreTell Quinn your bottle size and filling line for a B5823 quote.
Request a Quote