SABIC HDPE F00952 is a high molecular weight high density polyethylene copolymer for blown film. Its broad molecular weight distribution supports stable bubbles at high output while high density brings the stiffness that lets converters run thinner gauge without losing strength.
The grade carries antioxidant stabilization and prints well after corona treatment, making it a workhorse for carrier bags, liners and industrial sacks.
SABIC HDPE 25 kg bag
Values are typical and should be verified against the mill test report for the specific lot.
| Property | Value | Test method |
|---|---|---|
| Density | 0.952 g/cm³ | ISO 1183 |
| MFR (2.16 kg) | 0.05 g/10min | ISO 1133 |
| MFR (21.6 kg) | 9 g/10min | ISO 1133 |
| Recommended blow-up ratio | 4 | Typical practice |
| Melt temperature range | 200-235 °C | Typical practice |
| Antioxidant stabilization | Yes | Additive package |
| Corona treatability | Good | Surface energy after treatment |
F00952 is differentiated by its film window: the melt strength to hold a tall bubble and the drawdown to reach 15 µm class gauge. Blow-up ratio and frost line height together set the balance of stiffness, tear and opticals.
Because the resin is stiff for its density, converters use it to downgauge sacks and liners, cutting resin per bag while keeping drop performance. On multi-layer lines it is the strength layer that lets cheaper inner layers do the filling.
Bubble stability and downgauging
Surface moisture is rarely critical; pre-dry only for very thin gauge work.
Melt temperature 200-235 °C on HMW-HDPE film lines with grooved feed.
Set BUR around 4 with a high frost line for balanced MD and TD strength.
Corona treat the web to 38-42 dyn/cm for printing and lamination.
Shopping and vest bags with high stiffness.
Liners for sacks, boxes and drums.
Downgauged film replacing paper and LLDPE.
Standard valve bag for palletised shipment.
FIBC for reduced handling and waste.
Bulk delivery for continuous lines.
BUR, frost line and melt temperature for flat, strong film.
Read moreWhy HMW film resins let you run thinner without drops.
Read moreDemand, capacity and price direction for blown film.
Read moreTell Quinn your film spec and gauge target for an F00952 quote.
Request a Quote